Dual Mode Switching RF Duplicator Remote Control 315 433 868MHZ Copy Remote Control Rolling Code 4 Keys Wireless Remote For Gate
parameter:1. Working frequency: 300MHZ-915MHZ2. Working current: 20MA (12V)/12MA (3V)3. Working voltage: 12V or 3V4. Modulation method: AM ASK5. Remote control distance: ≥50M6. Copy method: copy together at close rangeFeatures1. No need to consider the frequency of the original remote control2. Support rolling code and encrypted copy (see copy list)3, remote control distance4. One four-button remote control can be converted into two four-button remote controls without affecting each otherInstructionStep 1：Before copying, you need to clear the code firstly. Press the Up two buttons of the duplicator at the same time, then the indicator will flash. it means the code is cleared successfully.Step2：Press the button of the multi-frequency duplicator and the original encrypted remote control respectively, either simultaneously or sequentially, and keeping pressing.The indicator of the multi-frequency duplicator will blink 2-3 times constantly,and will be on,then release it, copy successfully, Copy the other codes by following this step Tip: press the cloned-button on the clone remote, If the led indicator turns on all the time,that meansthat the code is cloned successfully. Clone the other codes from the original remote by following thestep"3Recovery:If erase the code by mistakes, don't worry we can recover it by Pressing the button C&D at the sametime for a bit long time, when the led flashes, the codes is recovredSwitching remote control channe:1. Keep Pressing the button 'BC' at the same time，when the Green indicator flashes then switch to thesecond remote control, release them, then it works;2. Keep Pressing the button 'BC' at the same time again，when the blue indicator flahses then switch back to thefirst default remote control.3.Note：The working status of the two remote controls do not affect each other.
